Low Pressure or Weak Flow
Use the following checks if your Clarus CF50 system has low pressure or weak water flow.
- Confirm that the pump is running.
- Check that the pool water level is high enough.
- Inspect the pump basket and skimmer for blockages.
- Open the filter air-relief valve to release trapped air.
- Clean or replace the filter cartridge.
- Confirm that all valves are fully open.
- Locate the main water supply valve.
- Turn it fully to the open position.
- Check the water flow again.
- Turn off the affected fixture.
- Remove the aerator or showerhead.
- Clean away debris and mineral buildup.
- Reinstall it and test the water flow.